Big Tire & Wheels
Free quote · Honest pricing

Suspension Repair: Shocks, Struts & Control Arms

Shocks, struts, control arms, ball joints, tie rods and bushings repaired right.

suspension-repair

If your car bounces after every dip, nose-dives when you brake, or makes a clunking noise over bumps, the suspension is telling you something. Shocks, struts, control arms, ball joints, tie rods, sway bar links and bushings all wear out with miles, and Sacramento's mix of freeway expansion joints, potholes and rough side streets in South Sacramento and Florin speeds that up.

At Big Tire & Wheels on Gerber Road, suspension repair starts with finding the actual worn part, not guessing. We lift the vehicle, check every joint and mount for play, look for leaking shocks and struts, and inspect bushings for cracks and tearing. A clunk might be a sway bar link, a ball joint or a strut mount, and each one is a different repair. We also listen to how you describe the problem, because when a noise happens (turning, braking or hitting a bump) helps narrow it down quickly.

Once we know what is worn, you get a written estimate before any work begins, as California requires. Nothing gets replaced until you approve it. We explain the findings in plain English or Spanish, separate what needs attention now from what can wait, and answer your questions without pressure.

Worn suspension and steering parts do more than make the ride uncomfortable. Loose tie rods and ball joints let the wheels wander, which shows up as vague steering, pulling and uneven tire wear. Tired shocks and struts let the tires bounce off the road, which can lengthen stopping distances and make the vehicle feel unstable in turns or on the freeway. Worn bushings and links can also let the body sway and lean more than it should. Catching these problems early often means a simpler repair and less wear on your tires and other parts.

Replacing struts, control arms, tie rods or other steering parts changes your wheel angles, so we finish suspension jobs with an alignment on our Hunter Hawkeye Elite system. That protects your tires and gets the steering wheel back to straight. Drivers from Sacramento, Elk Grove and nearby communities trust us for repairs on cars, trucks and SUVs.

This page covers repairing worn suspension and steering parts. If you are looking for an alignment alone, see our Alignment & Suspension page, and if you want to raise or level a truck, visit our Lift Kits page.

What's included

  • Suspension and steering inspection on the lift
  • Shock and strut replacement, including complete strut assemblies
  • Upper and lower control arm replacement
  • Ball joint replacement
  • Inner and outer tie rod end replacement
  • Sway bar link and sway bar bushing replacement
  • Control arm and suspension bushing replacement
  • Strut mount and coil spring inspection
  • Diagnosis of clunking, rattling and steering play
  • Hunter computer alignment after suspension or steering parts are replaced

Our process

  1. 1Tell us what you feel and hear, and we road-test when needed
  2. 2We lift the vehicle and check every joint, mount, bushing and shock
  3. 3You get a written estimate and approve the work before we start
  4. 4We replace the worn parts and torque everything to spec
  5. 5We align the vehicle on our Hunter system and road-test again

Frequently asked

What causes a clunking noise over bumps?+

The most common causes are worn sway bar links, ball joints, control arm bushings, strut mounts or shocks and struts. We inspect each one on the lift so we replace the part that is actually worn.

How do I know if I need shocks and struts?+

Common signs are bouncing after bumps, the front end diving when you brake, leaning in turns, fluid leaking from the shock body, and cupped tire wear. We can check them and show you what we see.

Do I need an alignment after suspension repair?+

Usually, yes. Replacing struts, control arms, tie rods and similar parts changes the wheel angles. We finish those jobs with an alignment on our Hunter Hawkeye Elite system to protect your tires.

Is it safe to drive with a bad ball joint or tie rod?+

Worn ball joints and tie rods affect steering control, and a badly worn part can separate. If you notice loose steering, wandering or a new clunk, have it checked as soon as you can.

Should shocks and struts be replaced in pairs?+

It is generally recommended to replace them in pairs on the same axle so both sides respond the same way. We will explain the options in your written estimate.

Will you replace parts without asking me first?+

No. You get a written estimate and we only do the work you approve. If we find something else during the repair, we stop and contact you first.

How is this different from your Alignment & Suspension page?+

This page is about repairing worn suspension and steering parts. Our Alignment & Suspension page focuses on alignments, and our Lift Kits page covers raising or leveling trucks. Call (916) 627-1998 if you are not sure which you need.

CallTextWhatsAppQuote